SmokeCloak Products

SmokeCloak Products

Since the introduction of SmokeCloak® as the world’s first commercial security fog generator in the early nineties, technologies have become more sophisticated and the requirements of the security world have continuously increased and become more complicated. And more importantly, traditional security and alarm systems don’t provide complete protection against violent smash and grabs that are plaguing the commercial marketplace. As featured in Popular Science and seen on The Discovery Channel!

VALI range

VALI is not only about high performance, with brand new features such as USB interface and fluid refill system the security product line is user friendly and very well designed. The range also features a brand new modern look and housing, which also allows for easy installation, service and maintenance. All this new technology is well protected in a compact and sturdy casing.

Dimensions17.24" x 13.39" x 6.9"17.24" x 13.39" x 6.9"19.21" x 13.39" x 6.9"
Weight (install)25.7 lbs25.7lbs31 lbs
Weight (hanging)44 lbs44 lbs51 lbs
Fluid1.7 litre fluid refill system1.7 litre fluid refill system1.7 litre fluid refill system
Standby consumption78W85W105W
Output780 Sq. ft. in 30 seconds*1430 Sq. ft. in 30 seconds *2188 Sq. ft. in 30 seconds*

*Full protection numbers are based on an 10 foot ceiling height


smokecloak info button

smokecloak contact button

SmokeCloak EASY/DNA
Unique control is provided by the EASY feedback system that automatically controls smoke density, regardless of the method of attack.
Support for optional verification movement detectors effectively removes the problem of unwanted activations.
Multiple system deployment allows protection for all sizes of buildings. Depending on the need, a SmokeCloak instant protection solution can consist of one or more SmokeCloak units.





SmokeCloak EASY/DNA is the perfect choice for securing small rooms, for instance:

  • Small rooms PC-equipment, flat screens, optical equipment, valuable documents etc.
  • Small stores with safes, expensive goods such as perfume, IT-equipment, jewellery, tobacco etc.
  • Server rooms
  • Local security (point security) – securing a local area in a large room


Dimensions 10″ x 7.6″ x 16.5″

Weight (install) 30 lbs

Fluid 1.0 litre fluid refill system

Power Consumption 1050W/110V

Output 1000 Sq. ft. in 60 seconds*

*Full protection numbers are based on an 8 foot ceiling height

smokecloak info button

smokecloak contact button


Wireless Control System

Our aim was to find a high quality yet simple wireless alarm system, to allow the installation of SmokeCloak units without the need for an alarm company contract. We also wanted to allow it to be configured so it could be used as a free standing portable machine solution.

  • It is possible to arm and disarm using a key fob or by simply texting the alarm system. It also able to communicate it’s status for your customers peace of mind.
  • It responds quickly to any intrusion and is capable of controlling the SmokeCloak device and also communicating that it has been activated.
  • It is simple enough to install with minimal wiring required but also complex enough to allow configuration to the requirements of a typical SmokeCloak installation.
  • The alarm panel uses a dual GSM sim card system to ensure maximum possible network coverage.
  • While the system we specified was aimed at being high quality and covering many possible different types of use. It is possible to scale this down to be more simplistic if the customer so requires.

IPA 117 Siren “The Intimidator”

The IPA117 has been specifically developed to be used to provide intense localised protection in conjunction with SmokeCloak, but can be used as a stand-alone security device. The IPA 117 is an ideal complement to Instant Protection Systems in small or unusually shaped locations with spread out valuable/ high-risk areas.
The human body is a fine tuned machine that relies on all senses to accomplish a task or fulfil a movement. If any of these senses are interfered with or removed the task of functioning correctly is greatly affected and consequently the brains ability to react normally is evaporated.
By interfering with this focus level in any manner that is severe enough to disorientate the brains normal evaluation process will directly affect the offenders ability to proceed. Expanding on this, the same principle of senses depravation is the debilitating effect of the IPA 117 Intimidator.
Unlike conventional sirens that transmit at a steady frequency , the IPA 117 Intimidator covers a frequency spectrum from 2 — 3khz and within that frequency range multiple tones are produced and oscillate in a random pattern. These random frequencies interact with the inner ear that directly affects the offenders balance and sense of wellbeing and enters into the sensory pattern and the longer he stays the worse they will feel.
The patented sound of the IPA 117 is produced by extremely powerful transducers driven by a custom built amplifier. This makes the IPA 117 capable of producing 117 dB of intolerable sound at a distance of 1 metre.

  • The built-in alarm interface makes it easy to connect to any electronic alarm installation and with on board battery backup, reliable protection is secured.
  • The IPA 117 is designed to easily to fit into all types of buildings. The outer casing is made of aluminium, and incorporates sabotage protection.
  • The IPA 117 can be easily linked with other IPA 117 units in order to protect a larger areas; the SmokeCloak products can be used to control the IPA 117.
  • The IPA 117 Intimidator is designed and manufactured by MSS rigorous quality system and is EXCLUVSIVE to SmokeCloak.

IPL 3000 Security Strobe

The IPL 3000 is designed to provide instant protection combined with a reduced SmokeCloak fog density, to produce a blinding effect. The IPL 3000 is a high quality, very high intensity, security strobe light. The system is compatible with all of the SmokeCloak. products, and is configured so that the operation of the IPL 3000 is controlled by the SmokeCloak. The IPL 3000 is designed for easy installation. The outer casing is made of metal so it can be located in public areas or concealed in roof spaces if preferred. The IPL 3000 can be easily connected to other IPL 3000 units in order to protect larger areas and used in combination with SmokeCloak vapour. The IPL 3000 gives very effective instant protection at a lower fog density.

  • 3000 W Lamp
  • Long life xenon lamp
  • High intensity Strobe action
  • Alarm interface
  • Sabotage resistant casing
  • Easy mount bracket
  • Fully flexible mounting position
  • Can be integrated with other SmokeCloak Products
  • Easy link system for multiple units

Contact Us